Vehicle-Mounted Pumps

Specifically designed for installation in international-style fire trucks, the compact, rear-mounted HL series pumps have built-in high-pressure relief valves. The HL200 has ratings from 2000 L/min. @ 10 bar (low pressure) to 400 L/min. @ 40 bar (high pressure).

S200防火泵由宽水工程师设计，以提供含水名称的最大质量和可靠性。bob综合手机在线登录通过实现国际标准的目标，S200通过在中国举行的en 1028，NFPA 1901（北美）和CCC在中国举行了这个目标。S200更安静，比当今市场上的任何其他消防泵更平静，更轻，更灵活。您可以放心，S200的可靠性和质量得到5年有限保修保证。

The rugged and reliable Waterous CR / CRU single-stage centrifugal fire pump provides the discerning pro a large capacity pump either pedestal-mounted (CR, CRU models) or with an optional chain-driven transmission (CRQA, CRQB, CRUQB). This CR end-suction pump has a water delivery rated at 2050 GPM @ 250 PSI (7800 L/min. @ 17 bar). The CRU end-suction pump has a water delivery rated at 2640 GPM @ 250 PSI (10000 L/min @ 17 bar). Like all of our pumps, the CR and CRU single-stage centrifugal fire pumps are tested at full power prior to shipment to ensure they meet each one of our rigorous standards.

In the flexible CZ/CZU pumps, Waterous provides ARFF specialists pedestal-mounted, single-stage centrifugal fire pumps with water delivery performances up to 950 GPM @ 260 PSI (3600 L/min. @18 bar) with 5" Victaulic® inlet or (CZU) up to 1500 GPM @ 250 PSI (5700 L/min @ 17 bar) with 6" Victaulic® inlet. With vertically-split cases, the CZ pump offers easy operation and simplified maintenance.

This ultra high-pressure performer is a lightweight four-stage centrifugal pump that delivers 90 GPM (350 l/ min) at 1350 PSI (93 bar) to produce high-pressure fog, which can knock out fires quickly while the pumper is either in motion or stationary.

RF-600的液压设计允许标称600 GPM等级，具有宽的剩余容量。在标准PTO加油泵不能提供必要的电源的情况下，RF-600是正确的选择。紧凑轻巧，RF-600建于适应大多数商业建造的消防车和油轮的底盘。通过使用分裂轴变速箱，通过宽水，通过宽水制造商制造和构建分流轴泵传动和泵。bob综合手机在线登录如果需要PTO或需要直接发动机安装，则可用额外的变速箱。

bob综合手机在线登录water’ latest innovation in the ARFF pump segment is the CPK-5 Ultra-High Pressure Package. Designed to flow 320 GPM @ 1350 psi (1200 l/min @ 93 bar), the CPK-5 meets the requirements of NFPA 414 for Class 4 or 5 ARFF vehicles and NFPA 1910 for Ultra-High Pressure Pump requirements. To meet the municipal NFPA 1901 requirement for Normal Pressure Fire Pumps, a separate CPK-2 pump driven off the transmission PTO can be used.

注意：要求净正吸头（NPSHR）：30英尺（9.1米）H.₂0 at 60°F (16° C).

The entire compact sized package for ARFF Class 4 and 5 consists of the following:

• CPK-5 Pump
• CPK-2 Pump
• TQC Power Take-Off
• 传动冷却系统