The leading single-stage split-shaft fire pump on the market today is available as a direct drive pump providing efficient use of power and performance. Designed with a two piece, horizontally split body with intake and discharge passageways in a single casting and on the same level, this pump provides the lowest possible height, a lower center of gravity, and more room for hose reels, hose beds and other equipment.
When used with a TC20 Series Power Take-Off (PTO), the CS / CSU can be rear-mounted in an apparatus.
CS FLOW | |
---|---|
GPM | 750, 1000, 1250 |
l/min | 3000, 4000, 5000 |
l/sec | 50, 65, 80 |
CS PRESSURE | |||
---|---|---|---|
PSI | Bar | kPa | MPa |
150 | 10 | 1000 | 1.0 |
CSU FLOW | |
---|---|
GPM | 1500, 1750, 2000, 2250 |
l/min | 6000, 7000, 8000, 9000 |
l/sec | 100, 115, 130, 150 |
CSU PRESSURE | |||
---|---|---|---|
PSI | Bar | kPa | MPa |
150 | 10 | 1000 | 1.0 |
CSD / CSUD Series |
Dimensional Drawings
Data Sheet Instructions Performance Curves Performance Sheets Service Parts Lists Spec Sheets Preferred Specifications |
Industry-leading sales and support.
When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.
Sales/Applications Assistance
Phone: 651-450-5234 (Press 3)
Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228
CSD / CSUD Series |
Pump Information |
españolportuguês |