CGT

  • CGT (Front View)
  • CGT (Rear View)
  • Meets or Exceeds National Fire Protection Association Standards
CGT

The CGT is a single stage design with vertically-split volute and pump transmission providing simple operation, easy maintenance and high reserve capacity.


The T Series Transmission uses an SAE bellhousing to mount the pump directly to the engine.

Request More Information
CGT PERFORMANCE
GPM L/min L/sec PSI Bar kPa MPa
MAXIMUM FLOW 750 2750 46 150 10 1000 1.0
MAXIMUM PRESSURE 80 300 5 350 24 2400 2.4

Specifications

  • High-tensile, close-grained gray iron (bronze/gunmetal optional), two-piece, vertically-split volute body
  • 17-4 stainless steel, heat-treated impeller shaft
  • Fully-enclosed, bronze, double-hubbed impeller with flame-plated hubs
  • Victaulic®, threaded or flanged intake connections
  • Self-adjusting corrosion- and wear-resistant mechanical seals
  • T Series Transmission consists of a close-grained, gray iron casing w/ constant-mesh, stainless steel helical gears
  • 5-year Limited Warranty

Options and Accessories

  • Priming System: An electric, oil-free rotary vane primer mounted directly on a Waterous split-shaft pump transmission or separately mounted combined with a Waterous priming valve forms the priming system. A lubrication option allows the use of Prime-Safe lubricant (priming tank is required when the lubrication option is selected).
  • Pressure Governor: Operates in PRESSURE or RPM; maintaining steady pump discharge pressure controlling the engine speed or by holding a selected engine RPM. Discharge pressure or engine RPM do not vary when switching between modes. Automatic low hydrant alarm (<20 psi) is armed when connected to a pressurized water source. Two-year warranty.
  • Pressure Control System: The Waterous Intake Relief Valve system is designed to act as a safety valve by "dumping" excess pressure from the inlet side of the pump. The Discharge Relief Valve provides sensitive pump control to protect firefighters from sudden pressure surges resulting from changes in discharge flows from the pump.
  • Manifold Drain Valve: Drains all points of the pump simultaneously with the operation of a single control.
  • 腐蚀保护:可更换镁element that is installed directly on the pump intake piping and into the pump waterway. These anodes sacrifice the magnesium element to galvanic corrosion.
  • Discharge Valves: Your choice of the trusted Waterous 1/4 turn 2.5" and 3.5" ball-type discharge valve or a 4" ANSI flanged discharge valve. Both options come standard with chrome-plated brass ball and hydraulically balanced seal assembly.
  • Overheat Protection Manager: The OPM consists of an illuminated warning light on the operator's panel whenever the pump approaches an overheat condition. Optional audible alarm is available.
  • Intake Fittings: Your choice of a 4", 4.5", or 5" threaded intake fitting (model CGVR), or a 5" flanged intake fitting (model CGVN). Note: 4.5" intake available in either 2.5" or 3" auxiliary intake ports. All other fittings come with 2.5" auxiliary intake ports only.
  • Tachometer: Tach. drive standard and operates at 1/2 input shaft speed.
  • 5-Year Limited Warranty with Total Protection Package (TPP-5): The Total Protection Package is a comprehensive warranty that increases your standard warranty to include labor expenses to dismantle, remove and reinstall covered products or parts.

资本利得税系列
泵Information Transmission Information
Dimensional Drawings
Data Sheet
Instructions
Performance Curves
Performance Sheets
Service Parts Lists
Preferred Specifications
Spec Sheets

Dimensional Drawings
Data Sheet
Instructions
Service Parts Lists
Specification Sheet
Miscellaneous Items

Sales/Application/Service Help

Industry-leading sales and support.

When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.

Sales/Applications Assistance

Phone: 651-450-5234 (Press 3)

pumpsales@waterousco.com

Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228

service@waterousco.com

Baidu
map