S100C20 / S101C20

  • S100C20 Front View
  • S100C20 Rear View
  • S101C20 Front View
  • S101C20 Rear view
  • C20 Transmission
  • Meets or Exceeds National Fire Protection Association Standards
  • Meets GOST R52283-2004 Russian Product Certification
S100C20 / S101C20

Get the power and performance of a traditional midship fire pump in a compact, lightweight design. Made of ductile iron, the S100 are nearly 35% lighter, and yet 25% stronger than identical pumps made with gray iron. Available as a direct-engine mount or matched with a Waterous aluminum case transmission.


The S100/S101 Split-Shaft model is equipped with a chain-driven C20 Transmission. The C20 Transmission provides the best In-Class power transfer.The silent chain-drive provides no gear whining, provides positive shifting and requires less horsepower that will enhance the efficiency of the apparatus.


Request More Information
S100 FLOW
GPM 1250, 1500, 1750, 2000
l/min 5000, 6000, 7000, 7500
l/sec 80, 100, 115, 125
CS PRESSURE
PSI Bar kPa MPa
150 10 1000 1.0

Specifications

  • Cast ductile iron body
  • Dual stripping edge volute
  • Passive lubrication system
  • Self-adjusting mechanical seal
  • Mechanically and hydraulically balanced impeller
  • Replaceable bronze wear rings
  • All deep-groove anti-friction ball bearings, oil-splash lubricated
  • 5-inch ANSI flange or optional end flanged discharge manifold
  • C20 Transmission consisting of an aluminum case and chain-driven for silent operation
  • 7-Year Limited Warranty

Options and Accessories

  • Priming System: An electric, oil-free rotary vane primer mounted directly on a Waterous split-shaft pump transmission or separately mounted combined with a Waterous priming valve forms the priming system. A lubrication option allows the use of Prime-Safe lubricant (priming tank is required when the lubrication option is selected).
  • Pressure Governor: Operates in PRESSURE or RPM; maintaining steady pump discharge pressure controlling the engine speed or by holding a selected engine RPM. Discharge pressure or engine RPM do not vary when switching between modes. Automatic low hydrant alarm (<20 psi) is armed when connected to a pressurized water source. Two-year warranty.
  • Pressure Control System: The Waterous Intake Relief Valve system is designed to act as a safety valve by "dumping" excess pressure from the inlet side of the pump. The Discharge Relief Valve provides sensitive pump control to protect firefighters from sudden pressure surges resulting from changes in discharge flows from the pump.
  • Manifold Drain Valve drains all points of the pump simultaneously with the operation of a single control.
  • Corrosion Protection: Replaceable magnesium element that is installed directly on the pump intake piping and into the pump waterway. These anodes sacrifice the magnesium element to galvanic corrosion.
  • Discharge Valves: Your choice of the trusted Waterous 1⁄4 turn 2.5 inch and 3.5 inch rack and sector push-pull, worm gear and electric discharge valves. All come standard with chrome-plated brass ball and hydraulically balanced seal assembly.
  • Overheat Protection Manager: The OPM consists of an illuminated warning light on the operator's panel whenever the pump approaches an overheat condition. Optional audible alarm is available.
  • 权力转移(S100甜闪络ion): Pneumatic shift allows operator to shift from ROAD to PUMP position by actuating a valve.
  • Electronic Tachometer Sensor (S100 with C20 Transmission): Monitors driveline rotational speed.
  • Waterous 21st Century Manifold: Designed to be mounted on the S100 discharge flange and can be oriented for top or side-mount control panels.
  • Seven-Year Limited Warranty with Total Protection Package (TPP-5): The Total Protection Package is a comprehensive warranty that increases your standard 7 year warranty to include labor expenses to dismantle, remove and reinstall covered products or parts for a period of five years.

S100C20 / S101C20 Series
Pump Information Transmission Information
Dimensional Drawings
Data Sheet
Instructions
Performance Curves
Performance Sheets
Service Parts Lists
Preferred Specifications
Spec Sheets
Dimensional Drawings
Data Sheet
Instructions
Service Parts Lists
Miscellaneous Items

Sales/Application/Service Help

Industry-leading sales and support.

When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.

Sales/Applications Assistance

Phone: 651-450-5234 (Press 3)

pumpsales@waterousco.com

Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228

service@waterousco.com

Baidu
map