CPT-3

CPT-3 (Front View) CPT-3 (Front View) CPT-3 (Rear View) Meets or Exceeds National Fire Protection Association Standards
  • CPT-3 (Front View)
  • CPT-3 (Rear View)
  • Meets or Exceeds National Fire Protection Association Standards
CPT-3

The CPT-3 is a compact two-stage pump with “pump and roll” capability making it ideal for extinguishing grass and brush fires.


The T Series Transmission uses an SAE bellhousing to mount the pump directly to the engine.

Request More Information
Flow / Pressure Specifications Options / Accessories Download Literature International Translations
CPT-3 PERFORMANCE
GPM L/min L/sec PSI Bar kPa MPa
MAXIMUM FLOW 500 1900 32 150 10 1000 1.0
MAXIMUM PRESSURE 60 200 3 800 55 5500 5.5

Specifications

  • High tensile, close-grained gray iron casing (bronze/gunmetal optional), one-piece volute body
  • Bronze double-hubbed, precision-balanced impellers
  • Separable impeller shaft for ease of serviceability
  • Push-pull manual bronze transfer valve
  • Available in either rotation of input shaft
  • 4-inch (101.4mm) NPT tee adapter intake; two 2-inch (50mm) or 2.5-inch (64mm) NPT tee adapter (or 2.5-inch (64mm) tapped flange) discharge
  • T Series Transmission consists of an aluminum case with constant-mesh, stainless steel helical gears
  • Several optional speed-increasing transmission ratios
  • 7-year Limited Warranty

Options and Accessories

  • Priming System: An electric, oil-free rotary vane primer mounted directly on a Waterous split-shaft pump transmission or separately mounted combined with a Waterous priming valve forms the priming system. A lubrication option allows the use of Prime-Safe lubricant (priming tank is required when the lubrication option is selected).
  • Pressure Governor: Operates in PRESSURE or RPM; maintaining steady pump discharge pressure controlling the engine speed or by holding a selected engine RPM. Discharge pressure or engine RPM do not vary when switching between modes. Automatic low hydrant alarm (<20 psi) is armed when connected to a pressurized water source. Two-year warranty.
  • Pressure Control System: The Waterous Intake Relief Valve system is designed to act as a safety valve by "dumping" excess pressure from the inlet side of the pump. The Discharge Relief Valve provides sensitive pump control to protect firefighters from sudden pressure surges resulting from changes in discharge flows from the pump.
  • Manifold Drain Valve: Drains all points of the pump simultaneously with the operation of a single control.
  • Corrosion Protection: Replaceable magnesium element that is installed directly on the pump intake piping and into the pump waterway. These anodes sacrifice the magnesium element to galvanic corrosion.
  • Discharge Valves: Your choice of the trusted Waterous 1/4 turn 2.5" and 3.5" ball-type discharge valve or a 4" ANSI flanged discharge valve. Both options come standard with chrome-plated brass ball and hydraulically balanced seal assembly.
  • Overheat Protection Manager: The OPM consists of an illuminated warning light on the operator's panel whenever the pump approaches an overheat condition. Optional audible alarm is available.
  • Tachometer: Tach. drive standard and operates at 1/2 input shaft speed.

CPT-3 Series
Pump Information Transmission Information
Dimensional Drawings
Data Sheet
Instructions
Performance Curve
Performance Sheets
Service Parts Lists
Preferred Specifications
Spec Sheets 		Dimensional Drawings
Data Sheet
Instructions
Service Parts Lists
Specification Sheet
Miscellaneous Items

Sales/Application/Service Help

Industry-leading sales and support.

When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.

Sales/Applications Assistance

Phone: 651-450-5234 (Press 3)

pumpsales@waterousco.com

Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228

service@waterousco.com

CPT-3 Series
Pump Information Transmission Information

Baidu
map